2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL CLUTCH SWITCH ASSEMBLY

  1. B181125
    Install the clutch switch assembly and tighten the adjusting nut.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }

  1. B186774E01
    Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }

    NOTICE:
    After adjusting the pedal free play, perform the clutch switch assembly adjustment (Click here).


2. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY WITH CLUTCH MASTER CYLINDER
  1. Install the clutch pedal support sub-assembly with clutch master cylinder (Click here).

← INSPECTION (from Sep 2011)COMPONENTS (from Sep 2011) →