2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT MAGNET CLUTCH ASSEMBLY

I104344E05
  1. Check the magnet clutch operation.

    1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.
      If the operation is not as specified, replace the magnet clutch assembly.

  1. Measure the resistance.

  1. Measure the resistance between terminals 1 and 2.

    Standard resistance:
    65 to 125 Ω at 20°C (68°F)

    Text in Illustration 
    *1
    Magnet Clutch Rotor
    *2
    Battery
    *3
    Magnet Clutch Hub
    *a
    Component without harness connected
    (Magnet Clutch)
    If the resistance is not as specified, replace the cooler compressor assembly.

← DISASSEMBLY (from Sep 2011)REASSEMBLY (from Sep 2011) →