2011-2013 Land Cruiser · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
  1. Remove the clutch master cylinder assembly (Click here).


2. REMOVE CLUTCH PEDAL BRACKET SUB-ASSEMBLY
  1. Disconnect the clutch start switch connector.

  1. w/ Cruise Control System:
    Disconnect the clutch switch connector.

  1. C173249
    Remove the bolt and clutch pedal bracket.


3. REMOVE TURNOVER SPRING

C173236
  1. Move the pedal to the full stroke position.

  1. Remove the turnover spring.


4. REMOVE CLUTCH PEDAL SPRING

C173235
  1. Remove the E-ring and spring.


5. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

C173234
  1. Remove the nut, washer and bolt.

  1. Remove the clutch pedal from the clutch pedal bracket.


6. REMOVE CLUTCH PEDAL PAD
  1. Remove the clutch pedal pad from the clutch pedal.


7. REMOVE NO. 2 CLUTCH PEDAL CUSHION

C179832
  1. Remove the clutch pedal cushion from the clutch pedal.


8. REMOVE CLUTCH PEDAL SHAFT COLLAR

  1. C173231
    Remove the clutch pedal shaft collar from the clutch pedal.


9. REMOVE CLUTCH PEDAL BUSH

  1. C173232
    Remove the 2 bushes from the clutch pedal.


10. REMOVE CLUTCH PEDAL SPRING HOLDER

C173233
  1. Remove the clutch pedal spring holder from the clutch pedal bracket.

← COMPONENTS (from Sep 2011)ADJUSTMENT (from Sep 2011) →