REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. DRAIN CLUTCH FLUID |
| 2. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using a union nut wrench, disconnect the tube.
- HINT:
- Use a container to catch the fluid.
| 3. DISCONNECT CLUTCH RESERVOIR TUBE |
![]() ![]() |
Using pliers, grip the claws of the clip, slide the clip and disconnect the clutch reservoir tube.
- HINT:
- Use a container to catch the fluid.
| 4. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
Loosen the clutch pedal bracket bolt.

Remove the 2 nuts.

Disconnect the clutch pedal from the clevis, and remove the master cylinder.
Remove the gasket.


