2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REASSEMBLY

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the relief valve with engine oil and insert the relief valve and spring into the valve hole.

  1. Install the relief valve plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }


2. INSTALL OIL PUMP COVER

  1. A134834E03
    Apply fresh engine oil to the drive and driven rotors.

  1. Place the drive and driven rotors into the timing chain cover with the matchmarks facing the oil pump cover side.

  1. A134832
    Install the oil pump cover with the 7 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

  1. Install a new O-ring onto the oil pump cover.

  1. Install a new O-ring onto the oil pipe.


3. INSTALL OIL PUMP OUTLET PIPE

  1. A174346
    Install the outlet pipe with the 3 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

← INSPECTION (from Jan 2012)REASSEMBLY (from Jan 2012) →