ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Inspect the oil control valve (for intake camshaft).
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 1).
Operate the oil control valve using the GTS, and then check the engine speed.
- OK:
Control Range
Specified Condition
OFF
Normal engine speed
ON
Rough idle or engine stalls soon after oil control valve switched from OFF to ON
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 2).
Operate the oil control valve using the GTS, and then check the engine speed.
- OK:
Control Range
Specified Condition
OFF
Normal engine speed
ON
Rough idle or engine stalls soon after oil control valve switched from OFF to ON
Inspect the oil control valve (for exhaust camshaft).
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).
Operate the oil control valve using the GTS, and then check the engine speed.
- OK:
Control Range
Specified Condition
-100%
Normal engine speed
100%
Rough idle or engine stalls soon after oil control valve switched to 100%
Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).
Operate the oil control valve using the GTS, and then check the engine speed.
- OK:
Control Range
Specified Condition
-100%
Normal engine speed
100%
Rough idle or engine stalls soon after oil control valve switched to 100%
