2011-2013 Land Cruiser · Service Manual Suspension

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


DIAGNOSIS SYSTEM

  1. C174236E01
    If a malfunction is detected in the active height control suspension, the master warning light illuminates, and "Check 4-WHEEL AHC System" is displayed on the multi-information display.

  2. Test mode

    1. By switching from normal mode into test mode, the front acceleration sensor, rear acceleration sensor and suspension control switch can be inspected (Click here).


INITIAL CHECK

  1. C172259
    The initial check operates for approximately 3 seconds after the engine switch is turned on (IG). Therefore, the vehicle height information does not display on the height control indicator in the multi-information display. After the initial check is finished, the vehicle height information is displayed.

← TERMINALS OF ECU (from Sep 2011)DIAGNOSIS SYSTEM (from Jan 2012) →