DTC CHECK / CLEAR
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and the tester on.
Enter the following menus: Chassis / AHC / DTC.
Read the DTCs by following the prompts on the tester screen.
Refer to the Diagnostic Trouble Code Chart for DTC information (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and the tester on.
Enter the following menus: Chassis / AHC / DTC.
Clear DTCs.