2011-2013 Land Cruiser · Service Manual Suspension

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and the tester on.

  3. Enter the following menus: Chassis / AHC / DTC.

  4. Read the DTCs by following the prompts on the tester screen.

  5. Refer to the Diagnostic Trouble Code Chart for DTC information (Click here).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and the tester on.

  3. Enter the following menus: Chassis / AHC / DTC.

  4. Clear DTCs.

← DTC CHECK / CLEAR (Sep 2011 – Dec 2011)DATA LIST / ACTIVE TEST (from Sep 2011) →