2011-2013 Land Cruiser · Service Manual Vehicle Interior

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE COOLING UNIT BRACKET

E154872
  1. Remove the 2 screws and bracket.


2. REMOVE REAR SIDE NO. 3 AIR DUCT

E154873
  1. Remove the 2 screws and duct.


3. REMOVE DRAIN COOLER HOSE

E154791
  1. Remove the screw.

  1. Detach the claw and remove the drain hose.


4. REMOVE AIR CONDITIONER ACCESSORY ASSEMBLY

E154874
  1. Remove the packing.

  1. E154337
    Remove the bolt and 2 screws.

  1. Remove the air conditioner accessory assembly.

  1. Remove the 2 O-rings from the air conditioner accessory assembly.


5. REMOVE REAR COOLING UNIT EXPANSION VALVE

E154877
  1. Disconnect the connector.

  1. Detach the clamp.

  1. Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and expansion valve.


6. REMOVE BLOWER RESISTOR

E154878
  1. Disconnect the connector.

  1. Remove the 2 screws and blower resistor.


7. REMOVE REAR BLOWER MOTOR

E154879
  1. Disconnect the connector.

  1. Remove the 3 screws and blower motor.


8. REMOVE EVAPORATOR SUB-ASSEMBLY

E154880
  1. Remove the 12 screws and rear cooling unit case LH.

  1. Remove the evaporator.

  1. E131047
    Remove the 2 O-rings from the evaporator.


9. REMOVE WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY
← REMOVAL (from Jan 2012)REASSEMBLY (from Sep 2011) →