ON-VEHICLE INSPECTION
Inspection · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| INSPECT HEADLIGHT CLEANER CONTROL RELAY |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
6 (PB)- 4 (E)
When battery voltage is not applied between terminals 3 (IG) and 2 (H)
10 kΩ or higher
When battery voltage is applied between terminals 3 (IG) and 2 (H)
Below 1 Ω (0.8 to 0.9 seconds, then no continuity exists)
