2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

01-E0 Registration Complete Indication Error

Diagnostic trouble codes · Vehicles built from Sep 2011

Also covers:

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
01-E0
"Registration complete" signal from the master device cannot be received.
-
01-E3
Either condition is met:
  1. The registration demand signal from the slave device is output.
  2. The registration demand signal is output by receiving connection confirmation signal from the sub-master device.
-
01-E4
The multiple frame transmission is incomplete.
-

HINT:
Even if no fault is present, these DTCs may be stored depending on the battery condition or engine start voltage.


INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.


← 01-DF Master Error (from Jan 2012)01-E2 ON / OFF Indication Parameter Error (Sep 2011 – Dec 2011) →