INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL STARTER ASSEMBLY |
 |
- Install the starter with the 2 bolts.
-
Torque:
- 58 N*m{
591 kgf*cm
, 43 ft.*lbf
}
Connect the starter connector.
- Connect the starter wire with the nut.
-
Torque:
- 9.8 N*m{
100 kgf*cm
, 87 in.*lbf
}
Connect the terminal cap.
| 2.
INSTALL FRONT FENDER APRON SEAL REAR LH
|
 |
- Install the fender apron seal with the 4 clips.
| 3.
INSTALL FRONT FENDER APRON SEAL LH
|
 |
- Install the fender apron seal with the 4 clips.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).