REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FRONT FENDER APRON SEAL LH |
Using a clip remover, remove the 4 clips and fender apron seal.

| 3. REMOVE FRONT FENDER APRON SEAL REAR LH |
Using a clip remover, remove the 4 clips and fender apron seal.

| 4. REMOVE STARTER ASSEMBLY |
Disconnect the terminal cap.
Remove the nut and disconnect the starter wire.

Disconnect the starter connector.
Remove the 2 bolts and starter.

