INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL KNOCK SENSOR |
Install the 2 sensors with the 2 bolts as shown in the illustration.

- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Text in Illustration *A
for Bank 2
*B
for Bank 1
*a
Engine Rear
*b
Top
*c
Engine Front
*d
0 to 15°
Connect the 2 sensor connectors.
| 2. INSTALL NO. 1 WATER OUTLET PIPE |
Install the water outlet pipe with the 2 nuts and bolt.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Attach the 3 wire harness clamps.
| 3. INSTALL CYLINDER HEAD SUB-ASSEMBLY (for Bank 1) |
