REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE ENGINE ASSEMBLY |
Remove the engine (Click here).
| 3. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH (for Bank 1) |
Remove the cylinder head RH (Click here).
| 4. REMOVE NO. 1 WATER OUTLET PIPE |
Disconnect the 4 wire harness clamps.

for 3 Bolts Type
Remove the 3 bolts and water outlet pipe.
for 2 Nuts and Bolt Type
Remove the 2 nuts, bolt and water outlet pipe.
| 5. REMOVE KNOCK SENSOR |
Disconnect the 2 sensor connectors.

Remove the 2 bolts and 2 sensors.
