2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Sep 2011


1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

A183103E01

NOTICE:
  1. Avoid physical shocks to the accelerator pedal sensor assembly.
  2. Do not disassemble the accelerator pedal sensor assembly.
  3. Do not apply oil or lubricant to the accelerator pedal sensor assembly.
    If it is applied, the accelerator pedal sensor assembly may not move smoothly.

  1. Install the accelerator pedal sensor with the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the accelerator pedal position sensor connector.

← REMOVAL (from Sep 2011)COMPONENTS (Sep 2011 – Dec 2011) →