2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
Do not apply oil or lubricant to the accelerator pedal sensor assembly.
If it is applied, the accelerator pedal sensor assembly may not move smoothly.

  1. A183103E01
    Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 nuts and accelerator pedal sensor.

← ON-VEHICLE INSPECTION (from Sep 2011)INSTALLATION (from Sep 2011) →