2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

B180655
  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.


2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
Do not apply oil or lubricant to the accelerator pedal sensor assembly.
If it is applied, the accelerator pedal sensor assembly may not move smoothly.

  1. A183103E03
    Disconnect the accelerator pedal position sensor connector.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD

  1. Remove the 2 nuts and accelerator pedal sensor.

← ON-VEHICLE INSPECTION (from Jan 2012)INSTALLATION (from Jan 2012) →