2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE RADIATOR ASSEMBLY
  1. Remove the radiator (Click here).


2. REMOVE CRANKSHAFT PULLEY

  1. A072945E01
    Turn the crankshaft pulley, and align the notch with the timing mark "0" of the timing chain cover.

  1. G038065E10
    Check that the timing marks of the camshaft timing gears and sprockets are aligned with the timing marks of the bearing caps as shown in the illustration.

  1. A072947E03
    Using SST, hold the crankshaft pulley and loosen the pulley set bolt.
    SST
    09213-54015   (91651-60855)
    09330-00021  

  1. A072948E01
    Using the pulley set bolt and SST, remove the crankshaft pulley.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05030)


3. REMOVE FRONT CRANKSHAFT OIL SEAL

  1. A076330E01
    Using a screwdriver, pry out the oil seal.

    NOTICE:
    Be careful not to damage the crankshaft. Wrap the tip of the screwdriver with tape.

← COMPONENTS (from Jan 2012)REMOVAL (from Jan 2012) →