2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE RADIATOR ASSEMBLY
(Click here)

2. DISCONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

  1. A225377
    Remove the 3 bolts.

  1. A222108
    Disconnect the 2 hoses and water by-pass pipe.


3. REMOVE OIL FILTER BRACKET

  1. A268548
    Remove the 2 nuts, bolt, oil filter bracket and gasket.


4. REMOVE CRANKSHAFT PULLEY

  1. A072947E04
    Using SST, hold the crankshaft pulley and loosen the pulley bolt. Continue to loosen the bolt until only 2 or 3 threads are screwed into the crankshaft.
    SST
    09213-54015   (91651-60855)
    09330-00021  

  1. A072948E02
    Using the pulley set bolt and SST, remove the crankshaft pulley and pulley bolt.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05031)


5. REMOVE FRONT CRANKSHAFT OIL SEAL

  1. A221099
    Using a screwdriver, pry out the oil seal.

    NOTICE:
    Do not damage the surface of the oil seal press fit hole or crankshaft.

    HINT:
    Tape the screwdriver tip before use.

← REMOVAL (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →