DISASSEMBLY
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1.
REMOVE OIL PUMP SEAL |
 |
- Using a screwdriver and wooden block, pry out the oil seal.
- NOTICE:
- Do not damage the surface of the oil seal press fit hole.
| 2.
REMOVE OIL PUMP RELIEF VALVE |
 |
- Remove the plug, compression spring and relief valve.
| 3.
REMOVE OIL PUMP COVER |
 |
- Remove the 10 screws and pump cover.
| 4.
REMOVE OIL PUMP ROTOR SET |
 |
Remove the drive and driven rotors.