INSTALLATION
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL SPEED SENSOR SP2 |
![]() ![]() |
Coat a new O-ring with ATF and install it to the sensor.
Install the sensor with the bolt.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
Connect the sensor connector.
| 2. INSTALL SPEED SENSOR NT |
![]() ![]() |
Coat a new O-ring with ATF and install it to the sensor.
Install the sensor with the bolt.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
Connect the sensor connector.



