2011-2013 Land Cruiser · Service Manual Drivetrain

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT SPEED SENSOR NT

C110343E53
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the sensor.


INSPECT SPEED SENSOR SP2

C110343E54
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    560 to 680 Ω

    If the result is not as specified, replace the sensor.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →