INSPECTION
Inspection · Vehicles built Sep 2011 – Dec 2011
| INSPECT THERMOSTAT |
 |
- HINT:
- The valve opening temperature is inscribed on the thermostat.
Check that the valve is fully closed when the thermostat is at a low temperature (below 77°C (171°F)).
If not fully closed, replace the thermostat.
- Immerse the thermostat in water, then gradually heat the water.
Check the valve opening temperature of the thermostat.
- Standard valve opening temperature:
- 80 to 84°C (176 to 183°F)
If the valve opening temperature is not as specified, replace the thermostat.
- Check the valve lift.
- Standard valve lift:
- 10.0 to 11.3 mm (0.394 to 0.445 in.) or more at 95°C (203°F)
If the valve lift is not as specified, replace the thermostat.