2011-2013 Land Cruiser · Service Manual Suspension

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE FRONT SUSPENSION UPPER ARM BUSH

C155990
  1. Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.

  1. C178725E01
    Using SST and a press, press out the bush.
    SST
    09613-26010  
    09710-22021   (09710-01031)
    09950-00020  

    HINT:
    Remove the rear side bush using the same procedure as for the front side.


2. REMOVE FRONT UPPER BALL JOINT DUST COVER LH

C158521
  1. Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.

    NOTICE:
    1. Do not damage the ball joint dust cover.
    2. If the ball joint dust cover is damaged, replace it.

← REMOVAL (from Jan 2012)INSPECTION (from Sep 2011) →