REASSEMBLY
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL FRONT UPPER BALL JOINT DUST COVER LH |
![]() ![]() |
Pack the upper arm ball joint with MP grease.
- Grease capacity:
- 8.0 g (0.282 oz.)
Apply MP grease to the locations shown in the illustration.
- NOTICE:
- Do not apply MP grease to the tapered or threaded parts of the ball joint.
Install the dust cover to the upper arm.
Using a snap ring expander, install the dust cover set ring.

- NOTICE:
- Make sure the set ring is securely installed in the groove.
| 2. INSTALL FRONT SUSPENSION UPPER ARM BUSH |
![]() ![]() |
Using SST and a press, press in a new bush.
- SST
- 09710-26011
(09710-05061)
- HINT:
- Press in the rear side bush using the same procedure as for the front side.


