2011-2013 Land Cruiser · Service Manual Suspension

REASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. INSTALL FRONT NO. 1 SPRING BUMPER LH
  1. Install the 2 No. 1 spring bumpers.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }


2. INSTALL FRONT NO. 2 LOWER ARM BUSH LH

C173481E01
  1. Using SST and a press, press in a new bush.

    SST
    09710-26011   (09710-05081)

    NOTICE:
    Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.


3. INSTALL FRONT NO. 1 LOWER ARM BUSH LH

C173663E02
  1. Using SST and a press, press in a new bush.

    SST
    09223-00010  
    09612-30012  

  1. Apply MP grease to the locations shown in the illustration.

    NOTICE:
    Do not apply MP grease to the tapered or threaded parts of the ball joint.


4. INSTALL FRONT LOWER BALL JOINT ATTACHMENT LH
  1. Install the attachment with the nut and a new cotter pin.

    Torque:
    167 N*m{ 1703 kgf*cm , 123 ft.*lbf }

    NOTICE:
    If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.

← INSPECTION (from Sep 2011)INSTALLATION (Sep 2011 – Dec 2011) →