REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE V-BANK COVER SUB-ASSEMBLY
|
 |
- Remove the 2 cap nuts and V-bank cover.
| 3.
REMOVE FAN & GENERATOR V BELT
|
 |
- While releasing the belt tension by turning the belt tensioner counterclockwise, remove the fan and generator V belt from the belt tensioner.
| 4.
DRAIN POWER STEERING FLUID |
|
| 5.
DISCONNECT POWER STEERING OIL PRESSURE SWITCH CONNECTOR |
 |
Disconnect the connector.
Detach the wire harness clamp from the bracket.
| 6.
DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE |
 |
Slide the clip and disconnect the No.1 oil reservoir to pump hose from the vane pump.
| 7.
DISCONNECT PRESSURE FEED TUBE |
 |
- Remove the union bolt and disconnect the pressure feed tube.
Remove the gasket.
| 8.
REMOVE VANE PUMP ASSEMBLY |
 |
Remove the 2 bolts and vane pump.