2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

IGNITION SYSTEM 
Spark plug
Electrode gap for used spark plug
Maximum
1.3 mm (0.0512 in.)
Electrode gap for new spark plug
Standard
1.0 to 1.1 mm (0.0394 to 0.0433 in.)
CAMSHAFT OIL CONTROL VALVE 
Camshaft timing oil control valve
Resistance
1 - 2
Standard
6.9 to 7.9 Ω at 20°C (68°F)
THROTTLE BODY 
Throttle body with motor assembly
Resistance
2 (M+) - 1 (M-)
Standard
0.3 to 100 Ω at 20°C (68°F)
ACCELERATOR PEDAL 
Accel Sens. No.1 Volt %
Value
Released
Standard
10 to 22%
Depressed
Standard
54 to 86%
Accel Sens. No.2 Volt %
Value
Released
Standard
12 to 42%
Depressed
Standard
66 to 98%
CRANKSHAFT POSITION SENSOR 
Crankshaft position sensor
Resistance
1 - 2
Standard
1630 to 2740 Ω at cold
2065 to 3225 Ω at hot
ENGINE COOLANT TEMPERATURE SENSOR 
Engine coolant temperature sensor
Resistance
1 - 2
Standard
2.32 to 2.59 kΩ at Approx. 20°C (68°F)
0.310 to 0.326 kΩ at Approx. 80°C (176°F)
KNOCK SENSOR 
Knock sensor
Resistance
1 - 2
Standard
120 to 280 kΩ at 20°C (68°F)
AIR FUEL RATIO SENSOR 
Air fuel ratio sensor (for Bank 1)
Resistance
1 (HA1A) - 2 (+B)
Standard
1.8 to 3.4 Ω at 20°C (68°F)
Air fuel ratio sensor (for Bank 2)
Resistance
1 (HA2A) - 2 (+B)
Standard
1.8 to 3.4 Ω at 20°C (68°F)
HEATED OXYGEN SENSOR 
Heated oxygen sensor (for Bank 1)
Resistance
1 (HT1B) - 2 (+B)
Standard
11 to 16 Ω at 20°C (68°F)
Heated oxygen sensor (for Bank 2)
Resistance
1 (HT2B) - 2 (+B)
Standard
11 to 16 Ω at 20°C (68°F)
← SERVICE DATA (Sep 2011 – Dec 2011)TORQUE SPECIFICATIONS (Sep 2011 – Dec 2011) →