CUSTOMIZE PARAMETERS
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Air Conditioner Display
Default
Contents
Setting
Relevant ECU
Set Temperature Shift
Normal
Function to set the temperature shift.
+2 C/+1 C/Normal/-1 C/-2 C
Air conditioning amplifier assembly
Compressor/Air Inlet DEF operation
Link
Function to automatically turn the A/C on when the FRONT DEF button is pressed.
Normal/Link
Air conditioning amplifier assembly
Compressor Mode
Automatic
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.
Manual/Automatic
Air conditioning amplifier assembly
Air Inlet Mode
Automatic
Function to automatically change to recirculation mode when the A/C is turned on.
Manual/Automatic
Air conditioning amplifier assembly
Foot/DEF Auto Mode
ON
Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.
ON/OFF
Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function
ON
Function to change the blower level automatically when the defroster is on.
ON/OFF
Air conditioning amplifier assembly
Ambient Temperature Shift
Normal
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
Air conditioning amplifier assembly
Add Foot Air in FACE Mode
ON
When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.
ON/OFF
Air conditioning amplifier assembly