2011-2013 Land Cruiser · Service Manual Vehicle Interior

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Air Conditioner 
    Display
    Default
    Contents
    Setting
    Relevant ECU
    Set Temperature Shift
    Normal
    Function to set the temperature shift.
    +2 C/+1 C/Normal/-1 C/-2 C
    Air conditioning amplifier assembly
    Compressor/Air Inlet DEF operation
    Link
    Function to automatically turn the A/C on when the FRONT DEF button is pressed.
    Normal/Link
    Air conditioning amplifier assembly
    Compressor Mode
    Automatic
    Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off.
    Manual/Automatic
    Air conditioning amplifier assembly
    Air Inlet Mode
    Automatic
    Function to automatically change to recirculation mode when the A/C is turned on.
    Manual/Automatic
    Air conditioning amplifier assembly
    Foot/DEF Auto Mode
    ON
    Function to turn the airflow from FOOT/DEF on automatically when auto mode is on.
    ON/OFF
    Air conditioning amplifier assembly
    Foot/DEF Automatic Blow Up Function
    ON
    Function to change the blower level automatically when the defroster is on.
    ON/OFF
    Air conditioning amplifier assembly
    Ambient Temperature Shift
    Normal
    Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
    +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C
    Air conditioning amplifier assembly
    Add Foot Air in FACE Mode
    ON
    When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow.
    ON/OFF
    Air conditioning amplifier assembly


CUSTOMIZING FUNCTION WITH MULTI-DISPLAY ASSEMBLY (w/ Navigation System)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:
The following items can be customized.

  1. Turn the engine switch on (IG).

  2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Climate settings.

    Air Conditioner 
    Display
    Default
    Contents
    Setting
    Relevant ECU
    Auto A/C Mode
    On
    Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch.
    On or Off
    Air conditioning amplifier assembly
    Efficient Ventilation Mode
    On
    Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on.
    On or Off
    Air conditioning amplifier assembly

← CUSTOMIZE PARAMETERS (Sep 2011 – Dec 2011)INITIALIZATION (from Jan 2012) →