2011-2013 Land Cruiser · Service Manual Vehicle Interior

U0100 Lost Communication with ECM / PCM "A"

Diagnostic trouble codes · Vehicles built from Jan 2012

Also covers:

DESCRIPTION

The air conditioning amplifier assembly communicates with the ECM and meter ECU through the CAN communication system.
DTC Code
DTC Detection Condition
Trouble Area
U0100
No communication with ECM
  1. CAN communication system
  2. ECM
  3. Air conditioning amplifier assembly
U0142
No communication with main body ECU (cowl side junction block LH)
  1. CAN communication system
  2. Main body ECU (cowl side junction block LH)
  3. Air conditioning amplifier assembly
U0155
No communication with combination meter assembly
  1. CAN communication system
  2. Combination meter assembly
  3. Air conditioning amplifier assembly

INSPECTION PROCEDURE


1. CHECK CAN COMMUNICATION SYSTEM
  1. Use the intelligent tester to check if the CAN communication system is functioning normally.

    1. for LHD: Click here.
    2. for RHD: Click here.
    Result 
    Result
    Proceed to
    CAN DTC is not output
    A
    CAN DTC is output (for LHD)
    B
    CAN DTC is output (for RHD)
    C



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← B1499 Multiplex Communication Circuit (Sep 2011 – Dec 2011)Air Conditioning Control Panel Circuit (Sep 2011 – Dec 2011) →