2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

  1. B181519
    Connect the speaker connector.

  1. Install the speaker with the 4 screws.

    NOTICE:
    Do not touch the cone part of the speaker.


2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
  1. Connect the connector.

  1. B183139
    Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

  1. B180821
    Attach the 4 claws and 13 clips to install the front door trim board sub-assembly.

  1. Install the 3 screws.


3. INSTALL DOOR ASSIST GRIP COVER LH

  1. B183138
    Attach the 8 claws to install the door assist grip cover to the door trim panel.


4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH
  1. Connect the connector.

  1. B183137
    Attach the 5 claws to install the armrest base panel.


5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

  1. B183136
    Attach the 4 claws to install the bezel.


6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

  1. B180820
    Attach the clip and claw, and install the front door lower frame bracket garnish.


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSPECTION (from Sep 2011)INSTALLATION (from Jan 2012) →