2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

  1. B181519
    Connect the speaker connector.

  1. Install the speaker with the 4 screws.

    NOTICE:
    Do not touch the cone part of the speaker.


2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

  1. B183139
    Connect the connector.

  1. Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.

  1. B180821
    Attach the 4 claws and 13 clips to install the front door trim board sub-assembly LH.

  1. Install the 3 screws.


3. INSTALL DOOR ASSIST GRIP COVER LH
  1. Attach the 8 claws to install the door assist grip cover LH to the front door trim board sub-assembly LH.


4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH
  1. Connect the connector.

  1. B183137
    Attach the 5 claws to install the armrest base panel.


5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

  1. B183136
    Attach the 4 claws to install the front door inside handle bezel LH.


6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
  1. Attach the clip and claw, and install the front door lower frame bracket garnish LH.


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →