2011-2013 Land Cruiser · Service Manual Vehicle Interior

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built from Sep 2011

HINT:
Use these procedures to troubleshoot the clock system.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard Voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.PROBLEM SYMPTOMS TABLE
    1. Refer to problem symptoms table (Click here).

    2. Result 
      Result
      Proceed to
      Fault is not listed in problem symptoms table
      A
      Fault is listed in problem symptoms table
      B

    B.
    A

    4.OVERALL ANALYSIS AND TROUBLESHOOTING
    1. Terminals of ECU

      HINT:
      1. for DVD (Click here)
      2. for HDD (Click here)

    NEXT

    5.ADJUST, REPAIR OR REPLACE
      NEXT

      ← SYSTEM DESCRIPTION (from Sep 2011)PROBLEM SYMPTOMS TABLE (Sep 2011 – Dec 2011) →