U0100/56 Lost Communication with ECM / PCM "A"
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Also covers:
- U0122/56 Lost Communication with Vehicle Dynamics Control Module
- U0126/56 Lost Communication with Steering Angle Sensor Module
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The steering control ECU receives signals from the skid control ECU, ECM and steering angle sensor via CAN communication. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system first.| DTC Code |
DTC Detection Condition |
Trouble Area |
| U0100/56 |
The steering control ECU detects an error in reception (from ECM) via CAN communication. |
|
| U0122/56 |
The steering control ECU detects an error in reception (from skid control ECU) via CAN communication. |
|
| U0126/56 |
The steering control ECU detects an error in reception (from steering angle sensor) via CAN communication. |
|
INSPECTION PROCEDURE
| 1. CHECK DTC |
Using the intelligent tester, check if the CAN communication system is functioning normally (Click here for LHD, Click here for RHD).
Result Result
Proceed to
DTC is not output
A
DTC is output (for LHD)
B
DTC is output (for RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
