2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REPAIR

Removal / installation · Vehicles built from Sep 2011


1. REPAIR INTAKE VALVE SEAT

A164597

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.

  1. Using a 90° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A164809E01
    Using 40° and 130° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

    Standard width:
    1.0 to 1.4 mm (0.0394 to 0.0551 in.)

  1. A164873
    Hand-lap the valve and valve seat with an abrasive compound.

  1. Check the valve seating position.


2. REPAIR EXHAUST VALVE SEAT

A164597

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.

  1. Using a 90° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A164809E02
    Using 60° and 150° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

    Standard width:
    1.0 to 1.4 mm (0.0394 to 0.0551 in.)

  1. A164824
    Hand-lap the valve and valve seat with an abrasive compound.

  1. Check the valve seating position.

← REASSEMBLY (from Jan 2012)COMPONENTS (from Sep 2011) →