2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REPAIR

Removal / installation · Vehicles built from Sep 2011


1. REPAIR INTAKE VALVE SEAT

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the intake valve seat smooth.

  1. A145575
    Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A124254E10
    Using 30° and 60° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

    Standard width:
    1.1 to 1.5 mm (0.0433 to 0.0591 in.)

    Text in Illustration 
    *1
    Width

  1. Hand-lap the valve and valve seat with an abrasive compound.

  1. Check the valve seating position.


2. REPAIR EXHAUST VALVE SEAT

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the exhaust valve seat smooth.

  1. A145576
    Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A124255E13
    Using 30° and 60° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

    Standard width:
    1.1 to 1.5 mm (0.0433 to 0.0591 in.)

    Text in Illustration 
    *1
    Width

  1. Hand-lap the valve and valve seat with an abrasive compound.

  1. Check the valve seating position.

← REASSEMBLY (from Sep 2011)COMPONENTS (from Sep 2011) →