REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for the LHD vehicle and RHD vehicle.
- The procedures listed below are for the LHD vehicle.
- Use the same procedures for the LHD vehicle and RHD vehicle.
| 1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
| 2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
![]() ![]() |
Disconnect the connector.
Remove the 3 screws and motor.


