INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT DUCT TEMPERATURE SENSOR |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
at 10°C (50°F)
9.4 to 10.5 kΩ
1 - 2
at 15°C (59°F)
7.5 to 8.3 kΩ
1 - 2
at 20°C (68°F)
6.0 to 6.5 kΩ
1 - 2
at 25°C (77°F)
4.8 to 5.2 kΩ
1 - 2
at 30°C (86°F)
3.8 to 4.2 kΩ
1 - 2
at 35°C (95°F)
3.1 to 3.4 kΩ
1 - 2
at 40°C (104°F)
2.5 to 2.8 kΩ
1 - 2
at 45°C (113°F)
2.0 to 2.3 kΩ
1 - 2
at 50°C (122°F)
1.6 to 2.0 kΩ
1 - 2
at 55°C (131°F)
1.3 to 1.6 kΩ
1 - 2
at 60°C (140°F)
1.1 to 1.4 kΩ
- NOTICE:
- Touching the sensor even slightly may change the resistance value. Hold the connector of the sensor.
- When measuring the resistance, the sensor temperature must be the same as the ambient temperature.
- Touching the sensor even slightly may change the resistance value. Hold the connector of the sensor.
- HINT:
- As the temperature increases, the resistance decreases (See the graph).


