2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL DUCT TEMPERATURE SENSOR

  1. Attach the 4 claws to install the 2 sensors.

    E157078


2. INSTALL REAR NO. 6 AIR DUCT
  1. Install the duct with the 5 screws.

  1. Connect the 2 connectors.

    E155886


3. INSTALL FRONT FLOOR CARPET ASSEMBLY
  1. Install the floor carpet.


4. INSTALL REAR NO. 1 SEAT PROTECTOR

B184032E01
  1. Attach the 10 claws to install the 2 seat protectors.


5. INSTALL REAR NO. 2 SEAT PROTECTOR

B184031E01
  1. Attach the 10 claws to install the 2 seat protectors.


6. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
  1. w/ Sliding Roof:
    Install the rear seat cover cap (Click here).

  1. w/o Sliding Roof:
    Install the rear seat cover cap (Click here).


7. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
  1. w/ Sliding Roof:
    Install the front quarter trim panel (Click here).

  1. w/o Sliding Roof:
    Install the front quarter trim panel (Click here).


8. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
  1. w/ Sliding Roof:
    Install the rear seat cover cap (Click here).

  1. w/o Sliding Roof:
    Install the rear seat cover cap (Click here).


9. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
  1. w/ Sliding Roof:
    Install the front quarter trim panel (Click here).

  1. w/o Sliding Roof:
    Install the front quarter trim panel (Click here).


10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Install the tonneau cover assembly.


11. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
  1. w/ Sliding Roof:
    Install the rear floor mat rear support plate (Click here).

  1. w/o Sliding Roof:
    Install the rear floor mat rear support plate (Click here).


12. INSTALL REAR DOOR SCUFF PLATE LH
  1. w/ Sliding Roof:
    Install the rear door scuff plate (Click here).

  1. w/o Sliding Roof:
    Install the rear door scuff plate (Click here).


13. INSTALL REAR DOOR SCUFF PLATE RH
  1. w/ Sliding Roof:
    Install the rear door scuff plate (Click here).

  1. w/o Sliding Roof:
    Install the rear door scuff plate (Click here).


14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
  1. for Face to Face Seat Type:
    Install the rear No. 2 seat assembly (Click here).

  1. except Face to Face Seat Type:
    Install the rear No. 2 seat assembly (Click here).


15. INSTALL REAR NO. 2 SEAT ASSEMBLY RH
  1. for Face to Face Seat Type:
    Install the rear No. 2 seat assembly (Click here).

  1. except Face to Face Seat Type:
    Install the rear No. 2 seat assembly (Click here).


16. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
  1. for 60/40 Split Seat Type 40 Side:
    Install the rear No. 1 seat assembly (Click here).

  1. for 60/40 Split Seat Type 60 Side:
    Install the rear No. 1 seat assembly (Click here).


17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
  1. for 60/40 Split Seat Type 40 Side:
    Install the rear No. 1 seat assembly (Click here).

  1. for 60/40 Split Seat Type 60 Side:
    Install the rear No. 1 seat assembly (Click here).


18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


19. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← INSPECTION (from Sep 2011)INSTALLATION (from Jan 2012) →