ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| CHECK MASS AIR FLOW METER |
Check the mass air flow value.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine / Data List / Primary / MAF.
Blow air into the MAF meter, and check that the MAF value fluctuates.

If the result is not as specified, check the MAF meter (Click here), or wiring and ECM (Click here).
