2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Jan 2012


1. INSTALL CRANKSHAFT POSITION SENSOR
  1. Install the crankshaft position sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the crankshaft position sensor connector.


2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
  1. Install the crankshaft position sensor protector with the 2 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }


3. INSTALL NO. 2 ENGINE UNDER COVER
  1. Install the No. 2 engine under cover with the 6 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

← REMOVAL (from Jan 2012)COMPONENTS (from Jan 2012) →