2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE NO. 2 ENGINE UNDER COVER
  1. Remove the 6 bolts and No. 2 engine under cover.


2. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR

  1. A218679
    Remove the 2 bolts and crankshaft position sensor protector.


3. REMOVE CRANKSHAFT POSITION SENSOR

  1. A218680
    Disconnect the crankshaft position sensor connector.

  1. Remove the bolt and crankshaft position sensor.

← COMPONENTS (from Jan 2012)INSTALLATION (from Jan 2012) →