2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE INTAKE MANIFOLD
(Click here)

2. REMOVE NO. 2 WATER BY-PASS PIPE

  1. A274163
    Disconnect the hose and remove the 2 bolts and No. 2 water by-pass pipe.


3. DISCONNECT NO. 8 WATER BY-PASS HOSE

A274164

4. DISCONNECT NO. 11 WATER BY-PASS HOSE

A214627

5. REMOVE NO. 1 WATER OUTLET PIPE

  1. A239696
    Remove the 2 bolts and No. 1 water outlet pipe.


6. REMOVE NO. 1 EGR PIPE BRACKET

  1. A239697
    Remove the 3 bolts and No. 1 EGR pipe bracket.


7. REMOVE NO. 4 ENGINE COVER

A214270

8. REMOVE NO. 3 ENGINE COVER

A214271

9. REMOVE SEPARATOR CASE

  1. A215435
    Remove the 4 bolts and separator case.


10. REMOVE NO. 2 ENGINE COVER

11. REMOVE NO. 1 ENGINE COVER

12. REMOVE KNOCK SENSOR

  1. A230377
    Disconnect the 4 knock sensor connectors.

  1. Remove the 4 bolts and 4 knock sensors.

← COMPONENTS (from Jan 2012)INSPECTION (from Jan 2012) →