ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accel Sens. No. 1 Volt % and Accel Sens. No. 2 Volt %.
Read the value displayed on the intelligent tester.
- Standard Value:
Tester Display
Condition
Specified Condition
Accel Sens. No.1 Volt %
Released
10 to 22%
Depressed
54 to 86%
Accel Sens. No.2 Volt %
Released
12 to 42%
Depressed
66 to 98%
