INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for LHD and RHD vehicles.
- The procedures listed below are for LHD vehicles.
- Use the same procedures for LHD and RHD vehicles.
| 1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR |
Connect the connector.

Attach the 2 claws to install the electrical key oscillator.
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect the connectors.

Attach the 14 claws to install the console panel.
| 3. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
Attach the 4 claws to install the box.

| 4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 9 claws to install the panel.

| 5. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Connect the connectors.

Attach the 7 claws to install the panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
Install the shift lever knob and twist it in the direction indicated by the arrow.


| 7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Attach the 7 claws to install the panel pad.

Install the screw.
Install the clip.
| 8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION |
Attach the 7 claws to install the panel cushion.

| 9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and 2 clamps.

Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 10. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.

