PRECAUTION
Precautions · Vehicles built Sep 2011 – Dec 2011
Versions by build date: from Jan 2012 Sep 2011 – Dec 2011
| 1.PRECAUTION FOR DISPLAY AND NAVIGATION ASSEMBLY |


The disc player disc has a built-in hard disk drive (HDD) for storing maps and other data used by the navigation system. When handling the disc player disc, follow the precautions below.
Do not touch cover of the HDD

- NOTICE:
- When removing or installing the disc player disc, hold it as shown in the illustration.
Avoid vibrations and impacts
- NOTICE:
- Do not drop or strike the disc player disc. Do not use a disc player disc that has been dropped or struck.
- Prepare a new disc player disc before removing the disc player disc.
- Do not drop or strike the disc player disc. Do not use a disc player disc that has been dropped or struck.
Avoid condensation
- NOTICE:
- Introducing the disc player disc to sudden temperature changes may cause condensation to form inside it, and may lead to malfunctions in the HDD.
- The removed display and navigation module display must be stored in an environment where the temperature, humidity, etc. is the same as the vehicle interior, and the disc player disc must not be removed.
- If transporting the disc player disc from its storage area to a location where the temperature, humidity, etc. is different, allow it some time to adapt to the surrounding environment.
- Introducing the disc player disc to sudden temperature changes may cause condensation to form inside it, and may lead to malfunctions in the HDD.
Avoid static electricity
- NOTICE:
- Touching the connector terminals may transmit static electricity to the inner circuits and may lead to malfunctions in the HDD.
- When installing or removing the disc player disc, observe all precautions to prevent damage to the system by electrostatic discharge (ESD).
- Touching the connector terminals may transmit static electricity to the inner circuits and may lead to malfunctions in the HDD.
Keep away from magnetic items
- NOTICE:
- Keep speakers, motors, magnetized tools, etc. away from the disc player disc.
When replacing the disc player disc, follow the precaution below.
After removing and installing the disc player disc, use the HDD information screen to perform the SMART inspection and confirm that there are no malfunctions in the HDD (Click here).
| 2.PRECAUTIONS DURING REPLACEMENT |
- NOTICE:
- When replacing electronic parts, if there is a possibility that your body may contact a circuit board, etc., use the recommended tools and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).
Procedures where static electricity countermeasures are necessary
Disc player disc replacement.
Internal wiring connection/disconnection, inspection, and replacement.
Precautions during procedures
Before performing any procedures, touch an unpainted metal part or ground bolt of the vehicle to eliminate any static electricity.
To prevent damage to electrical equipment, disconnect the battery's power supply before installing and removing electrical equipment.
Never touch the electronic parts of a circuit board, or the pins of an integrated circuit.
When performing procedures, do not allow clothing to come near or contact parts.