INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL HARD DISC |
 |
- Push the hard disc in the direction of the arrow shown in the illustration to install it.
- Install the cover in the direction of the arrow shown in the illustration.
Install the 2 screws.
| 2.
INSTALL NO. 2 RADIO BRACKET
|
 |
Install the No. 2 radio bracket with the 3 bolts.
-
Torque:
- 3.0 N*m{
30 kgf*cm
, 26 in.*lbf
}
| 3.
INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET |
 |
(Click here)
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).